Ehemals Band 23, Preprint 140
Shivarama K, Santhi Srinivas N C and Pavan Kumar RAJAVARAPU
Schlüsselwörter: Spring steel, gas nitriding, shot peening, Corrosion
Zusammenfassung:
<p>This study investigates the effect of shot peening and
low-temperature gas nitriding on the corrosion behavior of induction-hardened
and tempered chromium–silicon (Cr–Si) spring steel. Samples were processed
under different conditions, including shot peening (SP), nitriding (N),
pre-shot peening followed by nitriding (Pre SP+N), and pre-shot peening
combined with nitriding and post-shot peening (Pre SP+N+SP). Phase analysis
using X-ray diffraction confirmed the formation of nitrided surface layers,
with enhanced nitriding efficiency observed in pre-shot peened samples.
Corrosion behavior was evaluated using potentiodynamic polarization and
electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl solution. The
results showed that nitrided samples exhibited significantly improved corrosion
resistance compared to untreated and shot-peened conditions. Among all
treatments, the Pre SP+N condition demonstrated the best performance, with the
lowest corrosion current density, highest charge transfer resistance, and a
protection efficiency of approximately 86%. Surface analysis using SEM/EDS
revealed a transition from porous and non-uniform corrosion products in
untreated samples to dense and uniformly distributed layers in nitrided
conditions. The Pre SP+N+SP condition showed slight deterioration due to
microcrack formation. Overall, the corrosion mechanism shifted from localized
attack to a barrier-controlled process, with pre-shot peening prior to
nitriding providing the most effective surface protection.</p>
Da Sie nicht beim Journal angemeldet sind, ist es nun unsere Richtlinie, eine 'Nur-Text'-Version des/der preprint anzuzeigen. Diese Version wird durch Extraktion des Textes aus der PDF- oder HTML-Datei erstellt, und es ist nicht garantiert, dass der Text ein originalgetreues Abbild des Textes des Artikels ist. Die Nur-Text-Version soll als Referenz für Suchmaschinen bei der Indexierung der Website dienen und ist nicht dafür gedacht, von Menschen gelesen zu werden!
Wenn Sie die für Menschen lesbare Version des/der preprint ansehen möchten, registrieren Sie sich bitte (falls noch nicht geschehen) und melden Sie sich an. Die Registrierung ist völlig kostenlos.