Anciennement Volume 23, Préprint 140
Shivarama K, Santhi Srinivas N C and Pavan Kumar RAJAVARAPU
Mots-clés : Spring steel, gas nitriding, shot peening, Corrosion
Résumé :
<p>This study investigates the effect of shot peening and
low-temperature gas nitriding on the corrosion behavior of induction-hardened
and tempered chromium–silicon (Cr–Si) spring steel. Samples were processed
under different conditions, including shot peening (SP), nitriding (N),
pre-shot peening followed by nitriding (Pre SP+N), and pre-shot peening
combined with nitriding and post-shot peening (Pre SP+N+SP). Phase analysis
using X-ray diffraction confirmed the formation of nitrided surface layers,
with enhanced nitriding efficiency observed in pre-shot peened samples.
Corrosion behavior was evaluated using potentiodynamic polarization and
electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl solution. The
results showed that nitrided samples exhibited significantly improved corrosion
resistance compared to untreated and shot-peened conditions. Among all
treatments, the Pre SP+N condition demonstrated the best performance, with the
lowest corrosion current density, highest charge transfer resistance, and a
protection efficiency of approximately 86%. Surface analysis using SEM/EDS
revealed a transition from porous and non-uniform corrosion products in
untreated samples to dense and uniformly distributed layers in nitrided
conditions. The Pre SP+N+SP condition showed slight deterioration due to
microcrack formation. Overall, the corrosion mechanism shifted from localized
attack to a barrier-controlled process, with pre-shot peening prior to
nitriding providing the most effective surface protection.</p>
Comme vous n'êtes pas connecté(e) au journal, notre politique est désormais d'afficher une version « texte seul » du/de la preprint. Cette version est obtenue en extrayant le texte du fichier PDF ou HTML, et rien ne garantit qu'elle soit une image fidèle du texte de l'article. La version texte seul est destinée à servir de référence pour les moteurs de recherche lorsqu'ils indexent le site, et elle n'est pas conçue pour être lue par des humains !
Si vous souhaitez consulter la version lisible du/de la preprint, veuillez vous inscrire (si ce n'est pas déjà fait) puis vous connecter. L'inscription est entièrement gratuite.